A couple of things first off. This is about getting the game sound through headphones
For anyone in a rush, I will get straight to the point and say you just need a PS3 component cable
Recently I started to playing Darksiders
Being a very busy person flitting from TV interview to movie premiere all over the world, I couldn't get to this game until very late at night. Many of you will know that most OTHER people don't like video games, and so waking up to see their alarm clock jiggling along a bed side shelf at 02:00 because of some STOOPID video game, blasting throughout the house, is not going to exactly earn you breakfast in bed. Yes you can turn it down, but if you have it connected to a surround sound unit, that bass speaker is still going to thunder unquietly through the house.
So headphones would be good eh? But it's trying to find somewhere to plug them in. Your surround sound unit may have a headphone socket. If so, congratulations you win, goodbye. Your TV may have a headphone socket, and you too are a winner, good day to you sir! Now if you have the cash, there are surround sound headphones
This solution is WAY cheaper. You basically set the audio of the PS3 to use the component cable, and plug your headphones directly into the audio outputs of that cable.
1. Start up your PS3 and navigate to SETTINGS and then, SOUND SETTINGS
2. Then to AUDIO OUTPUT SETTINGS
3. Select AUDIO INPUT CONNECTOR/SCART/AV MULTI
4. You is done, press X
You have to plug your component cable into the back of the PS3 (it can only go in one socket and will only fit one way around).
I was using a VERY old cable, which was originally for an Xbox 1 (that's the larger square connector in the lower left), and PS2. But it appears that any PS2 component cable you might have lying around will work with the PS3.
You also need an adapter like this. This one I found in my heap of random audio connecting cables.
Then plug the adapter into the white and red audio cables of the component cable coming from the back of the PS3. Your headphones will then plug into that socket.
I found that I didn't have an issue with the audio level, it was fine with a set of large over the ear headphones as well as a little in-ear iPod style set.
With my headphones plugged in I didn't wake up the large pile of recently satisfied supermodel babes that discovered my mansion hideaway in the countryside. You of course don't get a surround sound experience when using the headphones this way, but if you value a quiet night without the need to fend off knife attacks from anyone who might happen to be sleeping nearby because you jarred them into a semi-conscious state of "I HAVE WORK IN THE MORNING AND YOU SHOULD FIX THE LEAKY BATHROOM SINK INSTEAD OF WASTING YOUR LIFE PLAYING VIDEO GAMES!!", then this method could be useful.
You can still output to the TV using the HDMI port so you get the full 1080p resolution. This method just routes the sound differently, so the image isn't affected.
So it's really simple. PS3 to COMPONENT CABLE to ADAPTER to HEADPHONES. There is no need to alter your image settings at all. Good luck!
Surround sound headphones $130.
Component cable + adapter - Less than $10.
You decide.
4 comments:
Will this method work if tv volume is set to lowest (off) and I have no remote (broken/lost) to raise audio at all on tv set?
It should, because you're taking the sound from the PS3 and not the television set.
The only problem with this is that the adapter you linked is very different from the one you used.
Thanks Anon. The link is now correct.
Post a Comment