I get asked to resurrect all kinds of ancient hardware, and this was no exception. An IBM 300PL desktop system with a strange error message on booting up.
The RF-ID Tag has changed
184 Asset control antenna not detected
System-Security Keyboard is locked.
System-Security Keyboard is unlocked.
176 The system has been tampered with.
Turn power to your system Off then On.
Your system is now locked.
Mysteriously 1984ish style boot message.
After lots of Google searches it appeared to come down to a couple of things. Changing the BIOS battery, resetting the BIOS, or malfunctioning capacitors on the motherboard.
Once you open up the case (and let all the ancient spirits similar to the Ark of the Covenant swirl around the room and dissipate) you may be lucky enough to find a sticker directing you to certain motherboard features.
This sticker was inside the lid of the case, which detaches completely, giving you an awesomely metallic one page book of instructional knowledge and power.
So according to this, the jumper is more or less in the center of the board. The sticker indicates the position to reset the BIOS. It's just a matter of moving the little plastic jumper so it connects the other two pins of the three, for a moment, and then putting it back again.
Here is the jumper on the board, yes, it's THAT exciting!
If after all that, it still just refuses to work, and all the cables appear to be connected (and you have removed the battery for a moment, or better still, replaced it entirely) then it could be the capacitors on the motherboard. I am so not into replacing these types of components, but if they are swollen or leaking they should be replaced.
The rest of the board appeared ok, but these looked jolly bulgy indeed to me. I have had other PC's die slow painful deaths from just this very issue.
And now a dirty and some might even venture, filthy, image for your delight...
If you know anything further, leave a comment.
1 comment:
When this happens on IBM board or you solve it by clearing CMOS, by jumper or by removing battery for a while when you cannot locate the jumper, or it is bad capacitors in the board. Google for "IBM error 176 bad capacitors" and you will confirm that 60% of the cases are due to the capacitors, some replaced the board others replaced the capacitors and some times the board worked. Usually bad capacitors are easy to see but you need confidence in soldering to attempt a motherboard repair.
Post a Comment